Skip to product information
1 of 7

Roster Lab

Telescopic Replacement Handle for Rolling Bags | Roster Lab

Telescopic Replacement Handle for Rolling Bags | Roster Lab

Quantity

CUSTOM BUILT. LAB APPROVED.

Every order is produced specifically for your team after your order is placed.

Premium Performance Apparel Estimated Production

2-3 Weeks

View full details

Collapsible content

Product Details

Replacement Telescopic (Retractable) Handle for Rolling Equipment Bags

Made to order. Ships within 2 to 3 business days.

Is your bag's handle broken, stuck, or won't stay extended? This replacement push-button telescopic handle (also called a telescoping, retractable or extendable handle) gets your rolling bag working again, so you do not have to retire a bag that still has plenty of seasons left.

Designed and tested by a youth select baseball coach who broke the original handle and could not find a replacement. The neck, the part that usually fails, has been redesigned with a wider waist, a flared transition into the bar, and a thicker insert.

Compatible with: Single-point rolling equipment bat bags with a spring-loaded push-button telescopic handle, including the Boombah Rolling Superpack and similar.

Not affiliated with, endorsed by, or sponsored by Boombah. Boombah is a trademark of its owner and is used here only to describe compatibility.

Important: this kit reuses your original hardware

This is a replacement for the broken plastic handle parts only. It is built to reuse the original hardware from your bag, so you must still have these four items:

  • 4 original screws from your handle
  • The original internal handle spine
  • The original metal rod
  • The original spring

If any of these are missing or damaged, this handle will not work for you. Please message us before ordering and we will help you check.

What you get

  • 1 top handle shell
  • 1 bottom handle with neck and insert
  • 1 push-button

The screws, internal spine, rod and spring are not included. You take them from your old handle.

Why this handle is built differently

  • Reinforced neck: widened waist, flared base and extended length at the original breaking point
  • Fits your original rod: cross-shaped channel sized to a 9.20 mm by 8.90 mm rod
  • Reinforced screw posts: 10 mm diameter screw posts with matching sockets, so they stand up to unscrewing
  • Recessed spring pocket: 9.6 mm pocket with a lead-in chamfer for easier assembly, made for the original 8.17 mm outer diameter compression spring
  • Printed in PETG: tougher and more heat tolerant than PLA

Specifications

  • Material: PETG, 3D printed
  • Parts: 3 (top handle, bottom handle with neck insert, button)
  • Reuses from your bag: 4 original screws, internal handle spine, metal rod, spring
  • Bar length: about 126 mm
  • Rod channel: 9.20 mm by 8.90 mm cross-shaped channel
  • Mounting screw spacing: 78 mm
  • Button: 35.5 mm by 14.25 mm oblong oval
  • Spring pocket: 9.6 mm diameter, for an 8.17 mm outer diameter spring (about 0.6 mm wire)
  • Brand: Roster Lab

Care and limits

This is a replacement handle for pulling and positioning an equipment bag. It is not rated for lifting, climbing or load-bearing use beyond normal bag handling. Replace it if you see cracks. Keep it out of enclosed hot vehicles for long periods.

Returns and replacements

Because every handle is made to order, we accept returns only if the handle does not fit your bag. If your handle arrives damaged in shipping, we will replace it. Message us and we will take care of it.

FAQ

How long until it ships?
Each handle is 3D printed to order. It ships within 2 to 3 business days after you place your order.

What is your return policy?
Returns are accepted only if the handle does not fit your bag. If it arrives damaged in shipping, we will replace it.

Is this a telescopic or retractable handle?
Yes. It is the push-button grip on a telescopic (also called telescoping, retractable or extendable) pull handle for a rolling equipment bag. It replaces the plastic handle parts and works with your original rod.

Do I need my old hardware?
Yes. This handle reuses the 4 original screws, the internal handle spine, the metal rod and the spring from your bag. It does not include them.

Will this fit my Boombah Superpack bag?
It is designed for push-button, spring-loaded telescopic handles on Superpack-style rolling bags. Check your rod against the 9.20 mm by 8.90 mm channel and your screw spacing against 78 mm. Message us a photo of your broken handle if you are unsure. This product is made by Roster Lab and is not affiliated with Boombah.

Is it strong enough for a full team bag?
The neck is reinforced at the point where original handles commonly break, and it is printed in PETG. It is built for normal pulling and positioning of the bag, not for lifting a full bag by the handle alone.

Do you offer team or bulk pricing?
Yes. Coaches and team managers can order multiples. Contact us for pricing.